佳能噴墨打印機報錯代碼5B00 / 5B01 / 5B02 / 5B03 / 5B04 / 5B05 / 5B10 / 5B11 / 5B12 / 5B13 / 5B14 / 5B15
5B00黑色打印頭計數器已達到標準值
5B01 藍色打印頭計數器已達到標準值
5B02 紅色打印頭計數器已達到標準值
5B03 黃色打印頭計數器已達到標準值
……….
佳能5b00代碼提示
拆下主板上eeprom芯片,重置數據
打印機上EEPROM芯片位置
恢復eeprom數據后安裝
error code 5B00 in the Canon g2000, g3000, g2002, and g2010 printer. You can solve this error code by using the following methods. You need the Canon service tool V4905 or V5302(清零軟件版本號) for solving this error.
The printer begins to blink orange and green light alternatively for 7 to 8 times when you try to print or scan
First of all, check your ink levels. Your cartridges should be half-filled to reset this error. If your ink is empty, refill it and continue the process
Hold the power button and press and release the ‘stop' button for 5 times. Then release the power button. wait till the green light is stable. Now your printer is in service mode.
下面介紹一種不用清零軟件復位方法
同樣要進入維修模式同時按電源鍵和停止鍵開機，然后不放電源鍵按5次停止鍵,手松開,進入到維修模式,電源燈常亮
紙盒里放入張紙，然后按5次停止鍵1次電源鍵，此時會打印1張清零成功的紙張,之后再按3次停止鍵1次電源鍵，然后會再打印一張紙，然后重啟就可以了.
【佳能打印機故障燈一直亮怎么辦 佳能打印機故障燈閃爍】(今完)
推薦閱讀
- 增壓泵壓力不穩定是什么原因「家用自來水增壓泵常見故障」
- 打印機連不上網是什么原因 打印機連不上
- 無法連接共享打印機0x0000007c 無法連接共享打印機
- 打印機驅動程序無法使用 打印機驅動程序無法使用怎么解決
- 壁掛爐e2故障怎么回事-壁掛爐e2怎么解決
- 感應燈壞了怎么查故障-感應燈不亮了怎么解決
- 佳能打印機故障燈閃爍4下 佳能打印機故障燈閃爍
- 家用打印機什么牌子好 家用打印機
- 脫機使用打印機前面的勾無法去掉 脫機使用打印機
- 自動檔車發動機空轉故障