日本免费全黄少妇一区二区三区-高清无码一区二区三区四区-欧美中文字幕日韩在线观看-国产福利诱惑在线网站-国产中文字幕一区在线-亚洲欧美精品日韩一区-久久国产精品国产精品国产-国产精久久久久久一区二区三区-欧美亚洲国产精品久久久久

  1. 首頁 > 云知道 > >

交換機鏈路聚合配置詳解 鏈路聚合配置有什么用

云知道

1、鏈路聚合——將多個物理端口捆綁為一個邏輯端口，對邏輯端口進行配置，從而達到增加鏈路帶寬和鏈路備份的目的 。鏈路聚合一般用在核心交換機上，物理端口最好是2的倍數來做捆綁 。

交換機鏈路聚合配置詳解 鏈路聚合配置有什么用


2、鏈路聚合的模式有兩種，手工負載分擔和LACP，手工負載分擔模式下所有活動線路的端口都參與數據的轉發和分擔流量，LACP模式支持鏈路備份 。
3、做鏈路聚合的端口速率、接口數量、雙工方式、端口模式（truck or access）必須一樣 。
4、做鏈路聚合的端口下不能有任何配置，對邏輯端口Eth-Trunk進行配置 。
5、下面一起看看詳細配置吧，準備兩臺5700交換機，如圖：
一、SW1配置：
[SW1]int Eth-Trunk 1
[SW1-Eth-Trunk1]int g0/0/23
[SW1-GigabitEthernet0/0/23]eth-trunk 1
[SW1-GigabitEthernet0/0/23]int g0/0/24
[SW1-GigabitEthernet0/0/24]eth-trunk 1
[SW1-GigabitEthernet0/0/24]q
[SW1]
[SW1]int et
[SW1]int Eth-Trunk 1
[SW1-Eth-Trunk1]port li
[SW1-Eth-Trunk1]port link-type tru
[SW1-Eth-Trunk1]port link-type trunk
[SW1-Eth-Trunk1]port trunk allow-pass vlan all
[SW1-Eth-Trunk1]disp th
#
interface Eth-Trunk1
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
[SW1]disp stp brief
MSTID Port Role STP State Protection
0 Eth-Trunk1 ROOT FORWARDING NONE
[SW2]disp int eth-trunk 1
Eth-Trunk1's state information is:
WorkingMode: NORMAL Hash arithmetic: According to SIP-XOR-DIP
Least Active-linknumber: 1 Max Bandwidth-affected-linknumber: 8
Operate status: up Number Of Up Port In Trunk: 2
--------------------------------------------------------------------------------
PortName Status Weight
GigabitEthernet0/0/23 Up 1
GigabitEthernet0/0/24 Up 1
[SW1]disp int Eth-Trunk 1
Eth-Trunk1 current state : UP
Line protocol current state : UP
Description:
Switch Port, PVID : 1, Hash arithmetic : According to SIP-XOR-DIP,Maximal BW:
2G, Current BW: 2G, The Maximum Frame Length is 9216
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 4c1f-cc7c-16ef
Current system time: 2020-09-03 22:31:07-08:00
Input bandwidth utilization : 0%
Output bandwidth utilization : 0%
-----------------------------------------------------
PortName Status Weight
-----------------------------------------------------
GigabitEthernet0/0/23 UP 1
GigabitEthernet0/0/24 UP 1
-----------------------------------------------------
The Number of Ports in Trunk : 2
The Number of UP Ports in Trunk : 2
二、SW2配置：
[SW2]int Eth-Trunk 1
[SW2-Eth-Trunk1]int g0/0/23
[SW2-GigabitEthernet0/0/23]eth-trunk 1
[SW2-GigabitEthernet0/0/23]int g0/0/24
[SW2-GigabitEthernet0/0/24]eth-trunk 1
[SW2-GigabitEthernet0/0/24]q
[SW2]
[SW2]int et
[SSW2]int Eth-Trunk 1
[SW2-Eth-Trunk1]port li
[SW2-Eth-Trunk1]port link-type tru
[SW2-Eth-Trunk1]port link-type trunk
[SW2-Eth-Trunk1]port trunk allow-pass vlan all
[SW2-Eth-Trunk1]disp th
#
interface Eth-Trunk1
port link-type trunk
port trunk allow-pass vlan 2 to 4094
#
[SW2]disp stp brief
MSTID Port Role STP State Protection
0 Eth-Trunk1 DESI FORWARDING NONE
[SW2]disp int eth-trunk 1
Eth-Trunk1's state information is:
WorkingMode: NORMAL Hash arithmetic: According to SIP-XOR-DIP
Least Active-linknumber: 1 Max Bandwidth-affected-linknumber: 8
Operate status: up Number Of Up Port In Trunk: 2
--------------------------------------------------------------------------------
PortName Status Weight

推薦閱讀