3600#write memory
3d01h: %SYS-5-CONFIG_I: Configured from console by vty0 (127.0.0.11)
Building configuration...
3600#reload
【1 思科路由器系列軟件安裝與升級步驟】步驟 7: 檢驗升級
當路由器開啟后，請通過發出 show version 命令確保您當前運行的是新版本 。
3640#show version
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-I-M), Version 12.2(7b), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 04-Mar-02 20:23 by pwade
Image text-base: 0x600089A8, data-base: 0x60A6A000
ROM: System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (f)
Router uptime is 2 minutes
System returned to ROM by reload
System image file is "slot1:c3640-i-mz.122-7b.bin"
cisco 3640 (R4700) processor (revision 0x00) with 59392K/6144K bytes of memory.
Processor board ID 10524422
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
4 Ethernet/IEEE 802.3 interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)
20480K bytes of processor board PCMCIA Slot0 flash (Read/Write)
20480K bytes of processor board PCMCIA Slot1 flash (Read/Write)
Configuration register is 0x2102
請檢驗是否正確使用了版本12.2（7b），且config - register設定為0x2102 。
推薦閱讀
- 路由器以太網口配置命令
- [華為]路由器PPP、SLIP和MP配置命令
- 路由器CE1/PRI接口配置命令
- [華為]路由器配置文件管理命令
- [華為]路由器串口配置命令
- [華為]路由器IP性能配置命令
- [華為]路由器基本的系統管理命令
- R 第十章Quidway系列路由器調試命令
- 華為路由器升級全攻略
- 華為路由器開telnet